Magnetic Lifter

Smaller - Stronger - Sturdier - Safer


FEATURES :

  • Containing rare earth magnet significantly more powerful than ferrite.
  • Bi-polar structure ergonomically suitable for round work-pieces.
  • 5 models for flat plate and 4 models for flat and round work-pieces.
  • Minimised kicking force during switch handle turn-off process.
  • Economical design, offsetting the high cost of rare earth magnet.



Model Type Dimensions mm Capacity kg with 3 :1 Safety Factor Weight kg
Width Length w/switch Height w/eyebolt Flat 25mm Plate Round Diameter mm
KRE-15(1) 102 85/102 119/179 150 - - 7
KRE-30(2) 154 95/127 119/179 300 - - 14
KRE-50(3) 184 115/147 149/220 500 - - 21
KRE-80(4) 242 115/157 175/265 800 - - 35
KRE-100(5) 263 115/157 199/309 1000 - - 44
KRE-25/20(6) 154 115/147 119/179 250 200 160-200 15
KRE-45/30(7) 184 135/167 149/220 450 300 160-250 25
KRE-75/50(8) 242` 135/177 175/265 750 500 200-400 40
KRE-95/70(9) 263 135/177 199/309 950 700 250-400 50

Note:

Holding Base + Material: SS400, Thickness: 25mm, Face Roughness: Safety Factor = 3 : 1 (Holding Power)

  • Models (1) through (5) are for flat work pieces and models (6) through (9) for either flat or round work-pieces.
  • The switch handle of the KRE-15 turns 90 degrees, all other models turn 180 degrees.
  • As to the flat/round models, the ratio of adhesive force for flat work-piece to that for round one ranges 3 : 2 to 5 : 4.
  • The adhesive force for round work-pieces vary according to the diameter of the work-piece.
  • The capacity in the table is based upon 3 : 1 safety factor, it is approximately one third of actual adhesive force.
36 Enterprise St, Townsville, QLD ,4818 | Phone: + 61 7 4774 5508 | Facsimile : + 61 7 4774 4181 |
© Copyright All-Rig 2016